Back to menu

I/0 Mapper Types

The following I/O mapper types are supported by blueMSX :

(*)   With rom    
29   Jisyo   Jisho rom (to use with the Bunsetsu rom)
24   Kanji1   Kanji rom
30   Kanji12   Kanji12 rom
79   MoonSound   MoonSound rom
103   SVI727   Spectravideo 80 column card for MSX1
82   SVI80COL   Spectravideo 80 column card for SVI-328
         
    Without rom    
33   F4 Device Normal   Device used in MSXturboR computers and Sony MSX2+ computers
34   F4 Device Inverted   Device used in most MSX2+ computers
97   GIDE   Generic IDE interface
147   Joyrex PSG   Joyrex PSG module
26   Matsushita SRAM   2Kb internal SRAM for MSX2, MSX2+ and MSXturboR machines
88   MSX-MIDI   Only for MSXturboR FS-A1GT
84   MSX Printer   Only for the MSX family
101   Philips NMS-8280 Digitizer   Only for MSX2 NMS-8280
32   S1985   MSX engine used in MSX2 computers
58   S1990   MSX engine used in MSXturboR computers
75   SVI-328 Disk Controller   Only for SVI-328
83   SVI-328 Printer   Only for SVI-328
85   SVI-328 Serial Port   Only for SVI-328
90   Turbo-R Pause   Only for MSXturboR
60   Turbo-R PCM Chip   Only for MSXturboR
59   Turbo-R Timer   Only for MSXturboR
80   Y8950   MSX-AUDIO chip

(*) number used in the config.ini file


Back to menu