Shortcut |
Description |
F7 |
Loads the
CPU state previously saved by Quick Save
(F8). |
F8 |
Saves the CPU state to
a predefined file in the dedicated
directory. |
F9 |
Runs or
pauses the emulation. |
F10 |
Stops the emulation. |
F12 |
Hard Reset
and restart of the emulation. |
Pause
|
Toggles pause switch. |
PrtScrn |
Saves a
large unfiltered screenshot (544 x 480
pixels). |
Scroll
Lock |
Toggles Panasonic front
switch on/off. |
|
|
LAlt+Enter |
Toggles fullscreen. |
LAlt+Scrl
Lck |
Toggles
Panasonic MSX-AUDIO switch on/off. |
|
|
LAlt+F7 |
Loads a
saved CPU state from a file. |
LAlt+F8 |
Saves the CPU state to
a file. |
LAlt+F9 |
Switches
diskette in drive A to the next in a
series of disks that differ only by a
number or a letter. I.e. disk_1of3.dsk,
disk_3of3.dsk, disk_3of3.dsk |
LAlt+F10 |
Sets the screen size to
320x240 pixels. |
LAlt+F11 |
Sets the
screen size to 640x480 pixels. |
LAlt+F12 |
Runs blueMSX in
fullscreen mode. |
|
|
LShift+F6 |
Switch theme. |
LShift+F7 |
Starts/stops
audio capture. |
LShift+F8 |
Toggles mouse capture. |
LShift+F9 |
When held
down, the emulator runs as fast as
possible. |
LShift+F10 |
Resets emulation
frequency to 3.579MHz |
LShift+F11 |
Decreases
emulation frequency with 5%. |
LShift+F12 |
Increases emulation
frequency with 5%. |
|
|
LCtrl+F6 |
Shows Help dialog. |
LCtrl+F7 |
Opens the
Insert ROM cartridge into slot 1 dialog. |
LCtrl+F8 |
Opens the Insert ROM
cartridge into slot 2 dialog. |
LCtrl+F9 |
Opens the
Insert disk image into drive A dialog. |
LCtrl+F10 |
Opens the Insert disk
image into drive B dialog. |
LCtrl+F11 |
Opens the
Insert tape image into cassette reader
dialog. |
LCtrl+F12 |
Soft Reset (the RAM
Memory is not erased) and restart of the
emulation. |
|
|
LCtrl+Pause |
Exits the emulator. |
|
|
LCtrl+LAlt+F7 |
Shows special menu for
ROM cartridge into slot 1. |
LCtrl+LAlt+F8 |
Shows
special menu for ROM cartridge into slot
2. |
LCtrl+LAlt+F9 |
Toggles reset emulator
when disk image is inserted into drive A. |
LCtrl+LAlt+F10 |
Toggles auto-rewind
of the tape image after insertion into
cassette reader |
LCtrl+LAlt+F11 |
Opens the cassette
position dialog. |
LCtrl+LAlt+F12 |
Complete
Reset and restart of the emulation
without disk, tape or cartridge images. |
|
|
LCtrl+LAlt+B |
Loads a
video capture |
LCtrl+LAlt+C |
Stops a video capture |
LCtrl+LAlt+M |
Shows the
mixer. |
LCtrl+LAlt+N |
Plays the last video
capture |
LCtrl+LAlt+V |
Renders a
video file in the AVI format |
LCtrl+LAlt+X |
Records a video capture |
|
|
LCtrl+LSft+F8 |
Toggles reset emulator
when ROM cartridge inserted into slot 1
or slot 2 |
LCtrl+LSft+F10 |
Toggles use
of the cassette in read only mode . |
LCtrl+LSft+F11 |
Rewinds the cassette. |
|
|
LCtrl+LSft+F |
Enables/disables Floppy
Drive timing. |
LCtrl+LSft+M |
Toggles
maximum emulation speed. |
LCtrl+LSft+P |
Allows to advance a
printer form to the top of the next page. |
LCtrl+LSft+S |
Toggles
showing/hiding of the sprites. |
LCtrl+LSft+W |
Minimizes the emulator
window. |
|
|
RAlt+F6 |
Toggles mono/stereo. |
RAlt+F7 |
Decreases
volume. |
RAlt+F8 |
Increases volume. |
RAlt+F9 |
Inserts a
Directory as Disk in drive A. |
RAlt+F10 |
Inserts a Directory as
Disk in drive B. |
RAlt+F11 |
Saves a
small unfiltered screenshot (272 x 240
pixels). |
RAlt+F12 |
Saves a large
unfiltered screenshot (544 x 480 pixels). |
RAlt+Scrl
Lck |
Mutes volume. |
|
|
RShift+F6 |
Shows the
emulation properties dialog. |
RShift+F7 |
Shows the video
properties dialog. |
RShift+F8 |
Shows the
audio properties dialog. |
RShift+F10 |
Shows the performance
properties dialog. |
RShift+F11 |
Shows the
files properties dialog. |
RShift+F12 |
Shows the settings
properties dialog. |
|
|
RCtrl+F6 |
Shows About dialog. |
RCtrl+F7 |
Removes ROM
cartridge from slot 1. |
RCtrl+F8 |
Removes ROM cartridge
from slot 2. |
RCtrl+F9 |
Ejects disk
image from drive A. |
RCtrl+F10 |
Ejects disk image from
drive B. |
RCtrl+F11 |
Ejects tape
image from cassette reader. |
|
|
RCtrl+RSft+D |
Opens the
debugger in a different window. |
RCtrl+RSft+K |
Shows the controllers /
keyboard editor. |
RCtrl+RSft+L |
Shows the
language dialog. |
RCtrl+RSft+M |
Shows the machine
editor. |
RCtrl+RSft+P |
Shows the
ports properties dialog. |
RCtrl+RSft+S |
Shows the shortcuts
editor. |
RCtrl+RSft+T |
Opens the
trainer in a different window. |